Back to Raspberry Pi Modules Cameras Accessories

Raspberry Pi 3 Model B+(Plus) / 3B mSATA SSD Storage Expansion Board X850 V3.1 USB 3.0 Expansion Board Module for Raspberry Pi

59 orders

$26.39

Clear

Note:

  1. ONLY X850 V3.1 Expansion Board is included.
  2. ​Raspberry Pi board is not included.
  3. Raspberry Pi X870/X860/X735 Board, SSD are all not included.
  4. The Power Switch is used to control the power of X870 / X860 / X850 when the power switch is connected to X735 old version(The X735 have two versions now, the new version X735 V2.0 is not fit in this case), or the power switch is useless.
  5. The cooling fan is useless if you purchase the X735, because X735 include cooling fan;
  6. Case Size (Installation): 9cm x 9cm x 6cm / 3.54inch x 3.54inch x 2.36inch;

[Packing List]

Bundle 1(X850 mSATA Board):
  • 1 x X850 V3.1 Expansion Board
  • 1 x USB 3.0 cable (Length: 60cm/ 23.62 inch)
  • 1 x Install Screws pack
  • ​1 x USB Connector

X850-Bundle-1

Bundle 2(X850 V3.0 Case):
  • 1 x X850 V3.0 Metal Case
  • 1 x Metal Case
  • 1 x Power Control Switch
  • 1 x Cooling Fan
  • 1 x Screws Pack

Raspberry Pi 3 Model B+(Plus) / 3B mSATA SSD Storage Expansion Board X850 V3.1 USB 3.0 Expansion Board Module for Raspberry Pi

[Overview]

The X850 v3.1 expansion board(updated version of V3.0) provides a complete storage solution for raspberry pi. It Supports up to 1TB mSATA solid-state drive (SSD)(Only mSATA interface). User can build a mobile hard disk with a high-speed USB 3.0 connectivity quick file transfer from a PC or a Mac. Furthermore, it supports USB booting from your SSD(‘reboot’ command is supported), USB bus-powered and no extra power for the SSD and so on…

[For Use With]

  • Raspberry Pi 3 Model B+ / 3 Model B / 2 Model B / 1 Model B+.

[Operating System]

  • All Raspberry Pi operating system.

[Features]

  • Supports up to 1TB mSATA solid-state drive (SSD)
  • Supports USB booting from your SSD
  • Ideal storage solution for Raspberry Pi
  • USB 3.1 Gen1 to SATA 6Gb/s bridge controller
  • USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
  • Quick file transfer with high-speed USB 3.0 connectivity from a PC or a Mac
  • USB bus-powered
  • LED blue indicator indicates drive status
  • Specially-made USB jumper to connect with Raspberry Pi – no additional cables needed
  • On-board micro-USB power socket to power high capacity SSD (>2.5Watts)

[Specification]

Power supply:
  • 5Vdc +/-5% , Powered by Raspberry Pi
  • 5Vdc via micro-USB socket, Additional power supply for SSD
Ports & Connectors:
  • USB socket – USB 3.0 type A x1
  • Micro-USB socket x1
  • 52P Mini PCI-E mSATA slot x1
PCB Size: 85mm x 56mm

Note:

  1. By connecting with USB connector, X820 V3.0 board is Powered by the Raspberry Pi motherboard.
  2. Support 5V power input from the SSD 5V power port on the X850 board at the same time. (you need to get a USB to Micro usb cable by yourself.)(Optional)

[Mobile Hard Disk Function]

Moblie disk-2

x850 V3.1 安装示意图-970x600

IMG_5017-W1000

IMG_5017-1-w1000

 

[Installation Guide]

Installation Guide-w800

[About mSATA]

mSATA

x850-ssd-port-对比图

[X850 V3.0 Matching Metal Case]

  • This is a NEW updated metal case with super quiet cooling fan kit for X850 V3.0 SSD mSATA storage board / X870 NVME M2 SSD Expansion Board / X860 M.2 NGFF SATA SSD Expansion Board / X735 Power&Cooling Management Board.
  • Power switch with beautiful LED indicator to control the power of X870 / X860 / X850 / 735 and the Raspberry pi;
  • Support super mute cooling fan, hundreds of round cooling holes on both side of the case, almost no weakness for the bluetooth and WIFI signal;
  • High quality metal material with surface galvanized process;
  • Side Slot(Interface) for GPIO/FFC Cable
  • Case Size(Installation): 9cm x 9cm x 6cm / 3.54inch x 3.54inch x 2.36inch;

[User Manual FAQ]

1/ How to detect X850 mSATA expansion board device?
Please try as the picture below:
HTB1hG0XkiqAXuNjy1Xdq6yYcVXas
2/ What do you need to use Raspberry Pi X850 V3.0 mSATA Storage Board?
(1) A Raspberry Pi board(Pi 3B+, 3B, 2B, B+)
(2) A Raspberry Pi Power Supply
(3) A mSATA solid-state drive (SSD)
(4) A X850 V3.0 use matching case (optional)
3/ More details and FAQ, please refer to:
Brand Name

Geekworm

Demo Board Type

ARM

Model Number

Raspberry Pi X850 V3.0 mSATA Module

Intergrated Feature

WiFi 802.11b/g/n

Interface

SATA

Compatible with

Raspberry Pi 3 Model B+(Plus) / 3B / 2B / B+

Support OS

All Raspberry Pi operating systems

Feature

Supports up to 1TB mSATA SSD

On-Board Ports

USB socket – USB 3.0 type A, mSATA SSD Port, SSD PWR Micro USB Port

Real customer reviews

There are no reviews yet.
Write a review

By using this website you agree to accept our Privacy Policy and Terms & Conditions

X

Like us on Facebook!

Shopping cart

×

No products in the cart.