Raspberry Pi 4B/3B+ Ethernet PoE Power Supply Module POE HAT Expansion Board with Fan Cooling
2.Support 802.3af PoE network standard
3.Fully isolated switch mode power supply (SMPS)
4.37-57 V DC, Class 2 device; 5V/2.5A DC output
5.25mm x 25mm brushless cooling fan delivering
6. 25mm x 25mm brushless fan for processor cooling
Before installing the PoE HAT, you must attach the supplied spacers in the four corners of the board.
Connect the PoE HAT to the Raspberry Pi 40pin and 4pin PoE interfaces. Once the PoE HAT board is connected, you can power the Raspberry Pi through its RJ45 network connector.
When unplugging the PoE HAT, pull evenly to make the module smoothly detach from the Raspberry Pi pin, avoiding the pin header.
1.Please ensure that your Raspberry Pi’s software is up to date for all functionality to be available, and there is no need to make other changes to the Raspberry Pi.
2.Support 802.3af PoE network standard. The PoE HAT allows you to power your Raspberry Pi using Power over Ethernet–enabled networks; for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.
3.The PoE HAT comes with a 25mm x 25mm small brushless cooling fan that is controlled by the Raspberry Pi via I2C.The fan will turn on and off automatically depending on the temperature of the main processor on the Raspberry Pi; Fully isolated switch mode power supply (SMPS),37-57 V DC,Class 2 device,5V/2.5A DC output
1 * Raspberry Pi PoE HAT
1 * RPi screws pack